:	May 11, 2004

.

Disconnect the battery ground cable.

.

Remove the thermostat housing.   Position a container to collect the fluid.   Disconnect the coolant hoses from the thermostat housing.   Remove the 3 bolts.   Remove and discard the seal.

.

: Eye protection must be worn. Remove the thermostat.   Position the thermostat housing in a vice.   Release and remove the thermostat.

.

Clean the thermostat cover and housing mating faces.

.

To install, reverse the removal procedure.   Install a new thermostat seal.   2) Tighten the bolts to 10 Nm (7 lb.ft).

.

Top up and bleed the coolant.